| Author |
Message |
    
Redeagle413
New member
Username: Redeagle413
Post Number: 1
Registered: 12-2014
| | Posted on Friday, January 02, 2015 - 9:34 am: | 
|
I'm trying to wire a connex sra-158-4h mic to my president hr-2510. Radio is a 5 pin. I'm almost sure the pins on the radio are: 1-audio, 2-shield, 3-transmit, and 4-5 are channel up and down. Any help would be greatly appreciated. |
Dale
Senior Member
Username: Dale
Post Number: 2152
Registered: 12-2002
| | Posted on Tuesday, January 06, 2015 - 4:21 pm: |
|
diffent name brand mikes have different
wiring patterns.ive never used this mike
so i dont know what they are.sorry.hopefully
someone else will chime in here
dale/a.k.a.hotrod
cef426
cvc#64
454 [dx numbers]
38lsb
|
Sonoma
Intermediate Member
Username: Sonoma
Post Number: 310
Registered: 11-2001
| | Posted on Tuesday, January 06, 2015 - 5:52 pm: |
|
if the 198 is wired for a 4 pin radio,say a cobra. it is
1- shield
2- audio
3-TX
4-RX
you know what you need on the 5 pin. just wire 1 2 and 3 wires to the 3 pins for the new plug. you will not need the RX wire for the 2510. leave pins 4 and 5 blank. |
