Author |
Message |
Inertia520
New member Username: Inertia520
Post Number: 4 Registered: 9-2012
| Posted on Monday, August 26, 2013 - 7:15 am: |
|
Hey guys just installed my first beam antenna this weekend that was purchased from copper along with rotor and bearing,,Always ran Maco ground planes and never tried a beam.Was wondering do beams take time to break in?. First night I talked on it I noticed increased static only on ch40,Then the next night static on 41..(27.415),Curious if anyone has had this issue Antenna is vertical bout 32 feet in the air swr's are 1.4 cross the band any info would be great thanks... |
Tech833
Moderator Username: Tech833
Post Number: 2264 Registered: 8-2002
| Posted on Tuesday, August 27, 2013 - 9:59 pm: |
|
Antennas do not have to "break in". However, sometimes, aluminum antennas take time to wear in from wind when the aluminum tubing wasn't first cleaned during assembly. The aluminum tubing joints almost always need to be cleaned prior to assembly. Your radio 'Mythbuster' since 1998
|
Sonoma
Intermediate Member Username: Sonoma
Post Number: 279 Registered: 11-2001
| Posted on Wednesday, August 28, 2013 - 8:01 am: |
|
I use steel wool to clean my joints when I put a antenna together no matter if it is new or old. makes a better connection. |
Inertia520
New member Username: Inertia520
Post Number: 5 Registered: 9-2012
| Posted on Wednesday, August 28, 2013 - 1:56 pm: |
|
Thanks guys Yeah I always clean all the parts on the aluminum antennas,Found my issue is was a led tv inside the house causing the static,just weird it was only on said frequencies and never affected my w5/8..Thanks |
Dale
Senior Member Username: Dale
Post Number: 1957 Registered: 12-2002
| Posted on Friday, August 30, 2013 - 10:01 pm: |
|
curious what ya had to do to fix the tv led as my tv is causing some noise on my radio dale/a.k.a.hotrod cef426 cvc#64 454 [dx numbers] 38lsb
|
Milkman21218
Advanced Member Username: Milkman21218
Post Number: 544 Registered: 1-2004
| Posted on Saturday, August 31, 2013 - 3:41 pm: |
|
I didn't know that LED TV's caused noise. I did know that the Plasma sets did. Thanks for the info. Izzy CEF#502
|
Tech833
Moderator Username: Tech833
Post Number: 2265 Registered: 8-2002
| Posted on Sunday, September 01, 2013 - 1:14 pm: |
|
The LED backlit TV's don't seem to make much RF noise (except for switching power supply noise typical of all new style TVs), but the new generation of LED TV's that use millions of micro-size multi-color LED's to create the image really do. Most of the time, the noise is created by power supplies or processors. If it's power supply, it's possible to suppress some of the noise. If it's processor, you have to do internal surgery to suppress any of that. Your radio 'Mythbuster' since 1998
|
Inertia520
New member Username: Inertia520
Post Number: 6 Registered: 9-2012
| Posted on Monday, September 02, 2013 - 5:38 pm: |
|
Its a newer led TV and thats what the noise sounded like was a power supply noise you could hear it surge back and forth.Yeah Dale I just turn it off when operating I use this TV inside my home for monitoring cctv,so when Im using the radio I don't really need it on.. |