| Author |
Message |
    
Rodder54
Junior Member
Username: Rodder54
Post Number: 12
Registered: 12-2001
| | Posted on Monday, November 26, 2012 - 10:36 pm: | 
|
pres washington only has about 1 watt when you key down what could be wrong & what to test |
Rodder54
Junior Member
Username: Rodder54
Post Number: 13
Registered: 12-2001
| | Posted on Tuesday, November 27, 2012 - 7:54 pm: |
|
it is a stock radio pres washington ether on 12v or 110 when you key up on antenna or dummy load about 1 watt or less i had this problem once before on a rci but cant remember what fixed it thanks |
Dale
Senior Member
Username: Dale
Post Number: 1902
Registered: 12-2002
| | Posted on Saturday, December 01, 2012 - 2:32 pm: |
|
need more info..
is this into a dummyload
what type of meter
is thre any swing foreward or reverse
does it work on ssb at all
dale/a.k.a.hotrod
cef426
cvc#64
454 [dx numbers]
38lsb
|
Jrsmith
New member
Username: Jrsmith
Post Number: 6
Registered: 7-2012
| | Posted on Sunday, December 02, 2012 - 3:28 am: |
|
u could try tuneing it. might have had the dead key turned down for use with amp. just a thought |
Rodder54
Junior Member
Username: Rodder54
Post Number: 14
Registered: 12-2001
| | Posted on Sunday, December 02, 2012 - 5:42 pm: |
|
antenna and dummy load tried to tune it thanks an older palomar meter and a pdc 700 and no swing goes about a 1/2 watt |
Jrsmith
Junior Member
Username: Jrsmith
Post Number: 11
Registered: 7-2012
| | Posted on Saturday, December 08, 2012 - 1:09 am: |
|
check the final or just swap it out with a replacement. if that don't work check the driver or get a replacement. it's probably not a out right simple open or short but a leaky device. just be carefull if you decide to replace the transistors. |
