| Author |
Message |
    
Nwc2bk
New member
Username: Nwc2bk
Post Number: 3
Registered: 1-2011
| | Posted on Monday, July 02, 2012 - 11:39 am: | 
|
Maybe someone can help. I have an older President washington, 4 pin mic connection which came with a Turner plus 3. I have now aquired a President hand stock mic. I think it may have been from a newer Uniden President but not sure. the mic has 4 wires. Shield, red, black and white. Ive tried so many different variations switching around the Audio/white, Transmit/red, and the receive/black with no luck. I get it to key the transceiever, but no matter how I change things around, I get no audio..just a hum when keyed up. I have given up, and this is my last resort. Anyone have some suggestions on what I may be doing wrong here?
Thanks |
Cheapskate
New member
Username: Cheapskate
Post Number: 6
Registered: 6-2012
| | Posted on Monday, July 02, 2012 - 5:05 pm: |
|
Maybe the element in the mic itself is bad. I have two bad mics on my bench now, they both key the radio fine but no audio. I put another element in one and it works fine. |
Jon666
Intermediate Member
Username: Jon666
Post Number: 475
Registered: 11-2003
| | Posted on Monday, July 02, 2012 - 5:27 pm: |
|
check the element it might be bad.
it should be
1 shield 2 white 3 red 4 black
what don't kill you makes you stronger
|
Nwc2bk
New member
Username: Nwc2bk
Post Number: 3
Registered: 1-2011
| | Posted on Tuesday, July 03, 2012 - 9:21 am: |
|
OK, thanks for the info. Ill check the mic element, its the only thing left that must be causing the problem.
Thanks again...Frank |
Jon666
Intermediate Member
Username: Jon666
Post Number: 476
Registered: 11-2003
| | Posted on Tuesday, July 03, 2012 - 5:27 pm: |
|
anytime
what don't kill you makes you stronger
|
