| Author |
Message |
    
Biskybabyusa
Member
Username: Biskybabyusa
Post Number: 92
Registered: 11-2006
| | Posted on Saturday, April 03, 2010 - 12:57 pm: | 
|
could someone give me the correct wiring for a astatic 104m6b to a uniden president hr2510 ?? the wiring as follows gives key up but no audio.
Pin1 white
Pin 2 shield and blue
Pin 3 Red
I'm lost thanks !!!!! Jim |
Tech808
Moderator
Username: Tech808
Post Number: 17551
Registered: 8-2002
| | Posted on Saturday, April 03, 2010 - 3:53 pm: |
|
Biskybabyusa / Jim,
According to my ASTATIC Wiring Hand Book you have it wired correctly.
PIN #1 ~ WHITE = AUDIO
PIN #2 ~ SHIELD = GROUND & BLUE = COMMON FOR SWITCHING
PIN #3 ~ RED = PTT - PUSH TO TALK
YELLOW = RECEIVE GROUND N/C = NOT CONNECTED
BLACK = RECEIVE CONTROL N/C = NOT CONNECTED
So I could only guess the problem is in the Mic itself.
Do other mic's work ok with the radio?
If they do then the problem is probably with the Mic itself.
Lon~Tech808
N9CEF
CEF#808
Radio Enthusiast!
|
Biskybabyusa
Member
Username: Biskybabyusa
Post Number: 93
Registered: 11-2006
| | Posted on Saturday, April 03, 2010 - 9:16 pm: |
|
the mic works fine on other radios, tried 2 mics actually, keyup but no audio ! Hmmmmm very strange ! |
Biskybabyusa
Member
Username: Biskybabyusa
Post Number: 94
Registered: 11-2006
| | Posted on Saturday, April 03, 2010 - 9:32 pm: |
|
It is the 104m6b, but should be the same as the regular lollipop ! Wonder what pin the audio wire is on for the stock mic ?
the book diagram shows
1 and 2 mic
3 and 2 ptt
4 and 2 channel up
5 and 2 channel down
2 common gtound |
Tech808
Moderator
Username: Tech808
Post Number: 17554
Registered: 8-2002
| | Posted on Saturday, April 03, 2010 - 10:19 pm: |
|
Tools
Mic. Wiring
Frequency Chart
CB & Ham Lingo
Modification List
Manuals
(Located to the LEFT of the Copper Forum here.
Model: HR-2510
Standard wiring:
1-Audio
2-Shield
3-Transmit
4-Channel Up
5-Channel Down
Astatic wiring:
1-White
2-Shield and Blue
3-Red
4-N/C
5-N/C
Yellow-N/C
Black-N/C
Lon~Tech808
N9CEF
CEF#808
Radio Enthusiast!
|
Biskybabyusa
Member
Username: Biskybabyusa
Post Number: 95
Registered: 11-2006
| | Posted on Saturday, April 03, 2010 - 11:03 pm: |
|
I know thanks ! |
Biskybabyusa
Member
Username: Biskybabyusa
Post Number: 96
Registered: 11-2006
| | Posted on Tuesday, April 06, 2010 - 1:02 pm: |
|
Got it Lon ! I forgot that I had taken the battery out of that mic--- Duh, hence no audio ! It's all set and cleaned up the audio with the Astatic mic. Any idea what a typical dead key and swing might be? |
Tech808
Moderator
Username: Tech808
Post Number: 17563
Registered: 8-2002
| | Posted on Wednesday, April 07, 2010 - 10:28 am: |
|
Sorry my mistake Jim,
 I did not even think to tell you to check the battery first.
Glad you have it working. 
Lon~Tech808
N9CEF
CEF#808
Radio Enthusiast!
|
Biskybabyusa
Member
Username: Biskybabyusa
Post Number: 97
Registered: 11-2006
| | Posted on Saturday, April 10, 2010 - 12:40 am: |
|
It's ok, you techs are great though !!! |
Train_man
Member
Username: Train_man
Post Number: 78
Registered: 10-2007
| | Posted on Tuesday, May 25, 2010 - 2:19 am: |
|
10w AM
25W SSB
If Doc has been in it,50w. |
Press_man
Intermediate Member
Username: Press_man
Post Number: 142
Registered: 5-2008
| | Posted on Saturday, May 29, 2010 - 3:01 pm: |
|
I have one too!
Set @ 3w am and max @ 10w am
SSB was 25-now 50w
Wally/Pressman/KC4ZWM
|
Dale
Senior Member
Username: Dale
Post Number: 1602
Registered: 12-2002
| | Posted on Friday, June 04, 2010 - 8:02 pm: |
|
mine was
am 3 watts dk 10 watt swing
ssb 25-30 watts
dale/a.k.a.hotrod
cef426
cvc#64
|
