Author |
Message |
Rigbuilder_1
New member Username: Rigbuilder_1
Post Number: 7 Registered: 12-2008
| Posted on Monday, February 15, 2010 - 2:41 pm: |
|
can anyone give me the spacing lengths for a 4 element jogunn vertical. not element lengths but distance between reflector, driven and director? |
Sonny
Intermediate Member Username: Sonny
Post Number: 198 Registered: 5-2004
| Posted on Wednesday, February 17, 2010 - 10:11 pm: |
|
I have a 4x4 but try this site jogunn.com |
Rigbuilder_1
New member Username: Rigbuilder_1
Post Number: 8 Registered: 12-2008
| Posted on Thursday, February 18, 2010 - 9:33 am: |
|
they don't have that info at their website. |
Tech808
Moderator Username: Tech808
Post Number: 17444 Registered: 8-2002
| Posted on Thursday, February 18, 2010 - 10:16 am: |
|
Rigbuilder_1, At thier website they do have a contact Ph number & address. Try contacting them direct for help. Lon~Tech808 N9CEF CEF#808 Radio Enthusiast!
|
Scrapiron63
Advanced Member Username: Scrapiron63
Post Number: 862 Registered: 12-2001
| Posted on Wednesday, March 03, 2010 - 11:48 am: |
|
I'm a little late on this and you might have the answer already. As you probably know the boom is pre-drilled for the spacing of the elements on this beam. Here's the measurements I took from one that I helped a friend put up sometime ago. Reflector to driven element = 51 inches Driven element to 1st director = 42 inches 1st director to 2nd director = 55 inches |
Rigbuilder_1
New member Username: Rigbuilder_1
Post Number: 9 Registered: 12-2008
| Posted on Saturday, March 20, 2010 - 10:06 am: |
|
thanks scrapiron63 for measurements for the 4 element jogunn. |