| Author |
Message |
    
Hobo2u
New member
Username: Hobo2u
Post Number: 3
Registered: 10-2006
| | Posted on Thursday, December 17, 2009 - 5:03 pm: | 
|
Hope you can help I got a RCI 2950. It has the orange display. When you turn the radio on you hear static and then a pop out of the speaker. It pops maybe 1\2 second after it comes on. It also pops loud when keying the mic especially when you use a d104 to it.It does transmit and receive.One person said it seem to be a little low on audio.
Thanks Wayne |
Hobo2u
New member
Username: Hobo2u
Post Number: 4
Registered: 10-2006
| | Posted on Friday, December 18, 2009 - 9:18 am: |
|
I want to add this to my post. I just got the radio used and I am sure the man has tried to tune it himself.That may be the problem but I don`t know what to do to help with this problem.
Thanks Wayne |
Tech808
Moderator
Username: Tech808
Post Number: 17316
Registered: 8-2002
| | Posted on Friday, December 18, 2009 - 10:17 am: |
|
Look to the <<< - LEFT of the Copper Forum here and you will see:
Tools
Mic. Wiring
Frequency Chart
CB & Ham Lingo
Modification List
Manuals
CLICK on: Modification List
Then enter your radio information.
Hopefully this will help you to get it back on track and working.
Lon~Tech808
N9CEF
CEF#808~CVC#002
Radio Enthusiast!
|
Hobo2u
New member
Username: Hobo2u
Post Number: 5
Registered: 10-2006
| | Posted on Friday, December 18, 2009 - 11:12 am: |
|
The radio is working.It just has the popping sound when you turn it on and when you key the mic. I did not see anything in the mods that would help
Thanks Wayen |
Tech565
Moderator
Username: Tech565
Post Number: 316
Registered: 7-2008
| | Posted on Friday, December 18, 2009 - 7:03 pm: |
|
sounds like it could be a problem in the audio section. Unfortunately, I cant help any more than that.
Tech565
Net and Asst. Net controller
CVC#38
Ham#243
|
