Author |
Message |
Bbmfic
Intermediate Member Username: Bbmfic
Post Number: 106 Registered: 1-2003
| Posted on Tuesday, November 17, 2009 - 5:28 pm: |
|
ok i got another box & works like new what could be wrong with the original box it is the same box it would still turn the rotor but it wouldnt show on the box the directions the new one works like new anyone have any answers? thanks bbmfic |
Captian_radio
Advanced Member Username: Captian_radio
Post Number: 566 Registered: 9-2004
| Posted on Sunday, November 22, 2009 - 8:15 pm: |
|
Check the meter fuse, its about a 1/8 amp fuse located inside the box near the meter. Bob VE1CZ CEF451 Robert L. Spicer The days of radio are just beginning!
|
505
Junior Member Username: 505
Post Number: 39 Registered: 9-2006
| Posted on Sunday, November 22, 2009 - 9:48 pm: |
|
Well i had the same problem years ago and the problem was in the rotor not the box. Inside the rotor it have a indicator, that indicator was broke If the indicator is broke ,you not going to se the needle move, so i call hygain and they send me the part $25.00 dollar. i replace the indicator and fix the problem. make sure the combination of wires are right,check the fuse,in the box it have a calibrator check that to or call HYGAIN customer service |
Bbmfic
Intermediate Member Username: Bbmfic
Post Number: 107 Registered: 1-2003
| Posted on Monday, November 23, 2009 - 9:59 am: |
|
i thougt i made it clear that i have a new box now & it all works like new got to be something in the old box that is broken cause like i said the new one works 100% i just want to fix the old box so i have a stand by when needed thanks bbmfic |