| Author |
Message |
    
Keiths121
Junior Member
Username: Keiths121
Post Number: 25
Registered: 8-2009
| | Posted on Wednesday, November 11, 2009 - 4:21 pm: | 
|
I'm thinking of getting one of these I found locally. My question is if it was used for only 10 meters in the past and I wanted to use it for 10 and 11 meters will I need to do any modifications to the unit? Also will an RCI-2995DX properly drive this amp? |
Dale
Senior Member
Username: Dale
Post Number: 1518
Registered: 12-2002
| | Posted on Wednesday, November 11, 2009 - 8:28 pm: |
|
the 2295 will drive it ok.however it will need modded for 11 meters
dale/a.k.a.hotrod
cef426
cvc#64
|
Keiths121
Junior Member
Username: Keiths121
Post Number: 27
Registered: 8-2009
| | Posted on Sunday, November 22, 2009 - 4:24 pm: |
|
I just picked up this unit. Opened it up to remove the chip so it will work on 11M and found out it has already been converted  This is my 1st experience with a tube amp. How is the tune and load set? Also I assume that the Input ADJ. knob will adjust the input to the amp from the radio? Does this work similiar to the RF power knob on the radio? Also what input to the amp is suggested for AM and SSB? |
Patzerozero
Senior Member
Username: Patzerozero
Post Number: 4730
Registered: 7-2004
| | Posted on Sunday, November 22, 2009 - 10:14 pm: |
|
http://rmitaly.com/download/instructions/KLV1000-Instruction.pdf |
