| Author |
Message |
    
Modulationkid
New member
Username: Modulationkid
Post Number: 9
Registered: 4-2007
| | Posted on Thursday, May 14, 2009 - 8:04 pm: | 
|
Can a tech tell me if the internal echo in the Galaxy 95T2 can be bypassed and replaced with a Connex type echo board with external controls? I like just about everything I see related to this radio but I definitely don't like the idea of having to take the covers off to adjust the echo control and I really don't want to add an external control.
I've never bought a radio from Copper before. Can you tell me if I can have modifications such as putting an external echo control in the radio and adding noise toys, etc.?
Also, doesn't Copper accept returns for non-working radios or repair them? Does all radio work require sending the radio back to mfg for repair? |
Dale
Senior Member
Username: Dale
Post Number: 1494
Registered: 12-2002
| | Posted on Thursday, May 14, 2009 - 9:57 pm: |
|
well im not a tech but i suppose ya could
pull out the echeo thats in it and replace it
with a connex type.all id do is buy a xtreame2018
has better echeo.and a noise cancelling featuring
dale/a.k.a.hotrod
cef426
cvc#64
|
Straycat
Member
Username: Straycat
Post Number: 64
Registered: 11-2001
| | Posted on Monday, May 18, 2009 - 8:13 pm: |
|
I have a 95T that has the echo controls on the outside as if connected to a connex board but the controls are for the original echo. It can be done. Ask your local CB tech. |
