| Author |
Message |
    
852
Intermediate Member
Username: 852
Post Number: 437
Registered: 3-2006
| | Posted on Tuesday, February 26, 2008 - 7:20 pm: | 
|
To run a let's say KL200P, or KL300P mobile amp as a base?? There would be nothing on the power supply but the amp..
Tommy~852~CEF 750
|
Tech808
Moderator
Username: Tech808
Post Number: 15369
Registered: 8-2002
| | Posted on Tuesday, February 26, 2008 - 7:34 pm: |
|
For a Power Supply Reference Guide go to:
Copper Talk » Subscriber (Preview)
» Articles
» WHICH POWER SUPPLY DO YOU NEED?
You may also want to check your e-mail as I responded to your question earlier today.
Is the e-mail address you have listed in your Profile correct?
Hope this help's,
Lon~Tech808
CEF#0808/HAM#001/CVC#0002
Tech808@copperelectronics.com
|
852
Intermediate Member
Username: 852
Post Number: 439
Registered: 3-2006
| | Posted on Wednesday, February 27, 2008 - 7:30 am: |
|
Sorry Lon, I just checked my email, all you mentioned about the KL200P mobile amp was that it uses a 12 amp fuse from the factory. So would I need the model PR-15 with 12 continuous amps or the PR-40 model with 32 continuous for a 150/200 watt transmitter??
Tommy~852~CEF 750
|
Tech808
Moderator
Username: Tech808
Post Number: 15374
Registered: 8-2002
| | Posted on Wednesday, February 27, 2008 - 7:51 am: |
|
From the Guide below it recommends / suggests using a 40 Amp Power Supply.
Copper Talk » Subscriber (Preview)
» Articles
» WHICH POWER SUPPLY DO YOU NEED?
Lon~Tech808
CEF#0808/HAM#001/CVC#0002
Tech808@copperelectronics.com
|
