| Author |
Message |
    
Jyd
Advanced Member
Username: Jyd
Post Number: 568
Registered: 11-2001
| | Posted on Tuesday, November 13, 2007 - 3:13 pm: | 
|
i have a 1 tube 8417 RM amp and it works great except when it is inline the receive is lower with it hooked up and if i got it on standbye the radio also shows lower output.its like something is resricting the receive and power out put when it is inline.i can take it out of line and everything is great.shows a good swr while inline. |
Hotwire
Senior Member
Username: Hotwire
Post Number: 2442
Registered: 1-2005
| | Posted on Saturday, November 17, 2007 - 2:12 pm: |
|
Not really sure about your problem but on my old AfterBurner 2 tuber the receive drops out a bit unless I use the receiver preamp. I figure it must be just the aging of particular componets inside the amp causing the undesired performance.
KEEP IT REAL!
Kenny
cef491(27.115lsb)
2sf491(27.555usb)
Indiana
|
Jyd
Advanced Member
Username: Jyd
Post Number: 569
Registered: 11-2001
| | Posted on Wednesday, November 21, 2007 - 6:50 pm: |
|
i will figure a way around this some how.ad a relay or something.does your radio out put power drop while the amp is inline? with amp off. |
