| Author |
Message |
    
Hyperno_1979
Intermediate Member
Username: Hyperno_1979
Post Number: 480
Registered: 12-2005
| | Posted on Friday, November 09, 2007 - 7:38 am: | 
|
I came across this guys. Maybe some of you can tell if it works or not?
HTX 10 MOD 25.150-29699mhz 1.open radio look up on front face board if you look very carefully you will see 2 solder pads where there could of been 2 pins for a jumper plug (like the 2950's)you will see one side goes to a smd. and the other goes to a ground island solder a resistor 10 ohms across pads (the resistor is brown black black gold 1/4 watt) Now put the radio back together and hold fun' and button 2 in while turning on .the radio will have a 40 channel display on right of freq display 1-40 press 2 to change bands along w/ lower left button' THERE is NO fine mod for radio due to missing components. and you know how to turn up amc and alc in the rear.
I'm sure there would be at least a few happy people out there if it does work.
CEFFFCEF
Bob
CEF703/CVC26
269 Hunter Valley
NOT allowed to hold a passport....
|
Unit199
Advanced Member
Username: Unit199
Post Number: 555
Registered: 8-2003
| | Posted on Friday, November 09, 2007 - 9:54 am: |
|
Does not work, so do not waste your time. BEEN THERE-DONE THAT!!!
HARVE
UNIT199
CEF210
CVC#18
|
Bruce
Senior Member
Username: Bruce
Post Number: 4526
Registered: 9-2003
| | Posted on Friday, November 09, 2007 - 11:01 am: |
|
I have NEVER seen a mod for the HTX-10 only DESTROYED HTX-10's !
On 6 since 66
|
Hootyal
Intermediate Member
Username: Hootyal
Post Number: 218
Registered: 9-2002
| | Posted on Friday, November 09, 2007 - 9:08 pm: |
|
We've through this before..the radio is modifiable but requires a processor chip exchange which is tedious & expensive to say the least but can and has been done. We posted the info back when Rat Shak was doing their "clearing house " pricing on these...The radio had to be shipped to Cali. and was basicly a mag 257 when returned..unless the radio was a gift, not worth it. Just bay a new Mag. 257 and save heartache/headaches |
Tech237
Moderator
Username: Tech237
Post Number: 892
Registered: 4-2004
| | Posted on Saturday, November 10, 2007 - 9:20 am: |
|
Bob - the same site that I found that data on also shows a CW adaptor for teh HTX-10. My HTX-10 has CW as an existing mode. That alone made me cautious.
Simon
Tech237
N7AUS
|
Bruce
Senior Member
Username: Bruce
Post Number: 4527
Registered: 9-2003
| | Posted on Saturday, November 10, 2007 - 4:46 pm: |
|
Htx-10 with CW ?
The HTX-100 had CW
On 6 since 66
|
