| Author |
Message |
    
Bendare2
Junior Member
Username: Bendare2
Post Number: 18
Registered: 8-2004
| | Posted on Wednesday, August 15, 2007 - 11:12 pm: | 
|
High RX on all modes but AM?
AM receive is very low........where do I start
looking for fix for this?...is it common?
Appreciate any and all help.......thanks.
................Ol'Ben |
Tech808
Moderator
Username: Tech808
Post Number: 14258
Registered: 8-2002
| | Posted on Thursday, August 16, 2007 - 3:16 am: |
|
You can download the Factory Service Manual FREE for your radio at:
http://rangerusa.com/downloads.html
That will give you a place to start and allow you to check everything to make sure everything is set to factory specifications's.
If you still have problems you can send it direct to Ranger for repair at:
Ranger Communications
Ranger Radios
1-800-668-6314
RMA number required
Hope this help's,
Lon ~ Tech808 ~ N9CEF
CEF#808 ~ CEF HAM#33 ~ CVC#002
Tech808@copperelectronics.com
|
Test_bot
Junior Member
Username: Test_bot
Post Number: 24
Registered: 3-2006
| | Posted on Thursday, August 16, 2007 - 10:13 pm: |
|
I picked up a older Non DX recently, and compared to a newer export the RX does seem quieter, If I kick on my Pre-amp it seems normal to what I am used to.
If there is no other issues with it and a alignment dont help there is a Mod to replace the RX diodes D34,D35 to schottky devices out there. So it may have been a common request. Good luck, I believe I read that they were common to have overload on RX also from someone close running high power. |
Bruce
Senior Member
Username: Bruce
Post Number: 4489
Registered: 9-2003
| | Posted on Friday, August 17, 2007 - 9:53 am: |
|
REPLACE 2sc1674 with 2sc2229 receiver RF stage works wonders ....
On 6 since 66
|
