| Author |
Message |
    
Knight_watch
Junior Member
Username: Knight_watch
Post Number: 41
Registered: 10-2006
| | Posted on Saturday, July 07, 2007 - 3:40 am: | 
|
I think my AR-3500 needs a new mic it has a squeal / buz and if I wiggle the mic wire at the end of the plug it goes away. I want to test this by using a different mic. I have a uniden 510xl would I be able to switch the mic's? They are both 4 pin. or do I need to rewire the uniden mic? I also have some desk mic's laying around to but I would like to try the stock uniden first and if that works then I will order a new one.
thanks
Mavrick
Charlie-Echo-Foxtrot 856
(CEF-856)
|
Unit199
Intermediate Member
Username: Unit199
Post Number: 494
Registered: 8-2003
| | Posted on Saturday, July 07, 2007 - 7:43 am: |
|
Check the wires at plug end. More than likely you have a wire loose or touching another or the plug case. My AR-3500 has a 8 pin plug.
HARVE
UNIT199
CEF210
CVC18
KB0YVK
|
Knight_watch
Junior Member
Username: Knight_watch
Post Number: 42
Registered: 10-2006
| | Posted on Sunday, July 08, 2007 - 3:27 am: |
|
Thanks 199,
The outer coating is cracked and I can see the inside color coded wires and a uncoated wire. If I were to reawire the plug after cutting off about an inch or so and were very careful not to have any touching that might do the trick?
Mavrick
Charlie-Echo-Foxtrot 856
(CEF-856)
|
