| Author |
Message |
    
Cbblackbeard
Member
Username: Cbblackbeard
Post Number: 84
Registered: 12-2003
| | Posted on Tuesday, August 10, 2004 - 9:39 pm: | 
|
I noticed that the KL203 is equiped with 12 gauge power wires. Should I just add more 12 gauge wire with bullet connectors and hook them directly to my battery?
What is the best way to hook up my KL203? |
Tech808
Moderator
Username: Tech808
Post Number: 3267
Registered: 8-2002
| | Posted on Wednesday, August 11, 2004 - 7:31 am: |
|
Cbblackbeard,
Yes you can connect as you mentioned above.
I personally run 10 Gauge wire direct from the battery and connect both the Radio and Mobile Amps to that using the TP-10-2 Quick Disconnect's for Mobile Amplifiers and Radios.
They allow me to change radios and/or amps very quickly and easily to prevent theft.
http://www.copperelectronics.com/cgi-bin/checkitout/checkitout.cgi?catalogSTORE:CKIE:prodW90-30012+
Copper also carries the:
TP-2 / 16 Gauge Quick Disconnects
Part #W90-30012
TP-10 / 10 Gauge Quick Disconnects
Part# W90-30010
TP-8 / 8 Gauge Quick Disconnects
Part #W90-30014
Hope this helps.
Lon
Tech808 |
Cbblackbeard
Member
Username: Cbblackbeard
Post Number: 90
Registered: 12-2003
| | Posted on Wednesday, August 11, 2004 - 7:15 pm: |
|
Thanks Lon. |
