| Author |
Message |
    
Crackerjack
Member
Username: Crackerjack
Post Number: 53
Registered: 7-2004
| | Posted on Tuesday, July 20, 2004 - 5:03 pm: | 
|
Looking at the 300P, I don't see a way to disengage the "preamp". The only failure UI have ever had from a kl amp, is the preamp and when it fails, if it can't be disengaged, there is no recieve.
Does anyone know if can be disengaged? |
Nightcrawler
New member
Username: Nightcrawler
Post Number: 1
Registered: 8-2003
| | Posted on Tuesday, August 03, 2004 - 8:50 pm: |
|
you can disengage the preamp by cutting the center leg of the tr3 transistor, after I cut mine I soldered wires to the cut parts, then ran the wires to the outside of the amp and soldered them to a toggle switch so I could still use the preamp. |
Tech808
Moderator
Username: Tech808
Post Number: 3190
Registered: 8-2002
| | Posted on Tuesday, August 03, 2004 - 9:06 pm: |
|
Nightcrawler,
WELCOME TO THE COPPER FORUM!
Lon
Tech808 |
|
