| Author |
Message |
    
Crackerjack
Junior Member
Username: Crackerjack
Post Number: 25
Registered: 7-2004
| | Posted on Sunday, July 18, 2004 - 9:50 pm: | 
|
This link from the manufacturer states that the frequency range of the KLV-25 is 10-22Mhz.
What gives? |
Hootyal
Intermediate Member
Username: Hootyal
Post Number: 136
Registered: 9-2002
| | Posted on Monday, July 19, 2004 - 6:13 am: |
|
before mod is done. |
Incubus
New member
Username: Incubus
Post Number: 1
Registered: 6-2004
| | Posted on Monday, July 19, 2004 - 3:10 pm: |
|
what mod? |
Tech808
Moderator
Username: Tech808
Post Number: 2998
Registered: 8-2002
| | Posted on Monday, July 19, 2004 - 5:45 pm: |
|
Incubus,
Unless you get a KLV from Copper who already does the Conversion / Mod a lot of the KLV Amps come stock and need to have the Conversion/Mod done to them to Open them for 10 ~ 11 meter use.
Hope this helps.
Lon
Tech808 |
Crackerjack
Junior Member
Username: Crackerjack
Post Number: 33
Registered: 7-2004
| | Posted on Monday, July 19, 2004 - 6:40 pm: |
|
So, that AMP will orerate in the 11/10 meter band off 110V when I get it? |
Tech808
Moderator
Username: Tech808
Post Number: 3019
Registered: 8-2002
| | Posted on Tuesday, July 20, 2004 - 9:59 am: |
|
Crackerjack,
Yes if you get it from Copper it will be ready to plug into the wall and after reading the instructions hook it up and start talking.
I would highly suggest using NO MORE than a 2 to 2-1/2 Watt carrier into the KLV-250 and it will last you a good long time.
The KLV Amplifiers are Low Drive Amps and very touchy about being over driven.
Lon
Tech808
|
Crackerjack
Member
Username: Crackerjack
Post Number: 65
Registered: 7-2004
| | Posted on Thursday, July 22, 2004 - 9:58 am: |
|
What kind of Power -actual output could I expect from the KLV-250 amd the KL-200P, respectively? AM/PM (I mean realistly) |
