Author |
Message |
Richiek
Junior Member Username: Richiek
Post Number: 30 Registered: 4-2008
| Posted on Monday, October 05, 2015 - 12:05 pm: |
|
While researching the old A/S Superscanner antenna, I recently ran across a site that has a list of some of the antennas that Antenna Specialists once made. I found one called the Match Maker that I had never heard of or seen. I'm curious if anyone of you out there has. The link is here: http://www.cbtricks.com/ant_manuals/ant_specialists/mr_77/index.htm It's a wild one that's for sure. 73's |
Spiderleggs
Member Username: Spiderleggs
Post Number: 56 Registered: 5-2002
| Posted on Sunday, October 11, 2015 - 6:00 pm: |
|
It is an unusual one. |
Thehobo
Intermediate Member Username: Thehobo
Post Number: 136 Registered: 2-2004
| Posted on Wednesday, October 14, 2015 - 11:34 am: |
|
had 2 of them in the 70's.. they were heavy duty , both vert, and horz, worked well. thehobo 269150 montour ch. thehobo 269150 monitor ch.
|
Press_man
Advanced Member Username: Press_man
Post Number: 887 Registered: 5-2008
| Posted on Thursday, October 15, 2015 - 3:16 pm: |
|
Neat looking antenna! I don't think I've ever seen one! I've been around since the 70's too. 73 Pressman
|
Tech833
Moderator Username: Tech833
Post Number: 2331 Registered: 8-2002
| Posted on Friday, October 16, 2015 - 1:49 am: |
|
The MR-77 begat the "Jo Gunn" and "Gizmotchy" beams. In vertical polarization mode, the work the same as a regular beam with the same number of elements (think ground plane 1/4 wave, if you will). In horizontal mode, it acts like a horizontal yagi with end loaded elements. Don't get too excited... Your radio 'Mythbuster' since 1998
|
Richiek
Junior Member Username: Richiek
Post Number: 31 Registered: 4-2008
| Posted on Tuesday, October 20, 2015 - 8:48 pm: |
|
I have never seen one in person and was just curious about them. I still miss my old Superscanner. i know some folks didn't like them, but mine worked quite well for me at the time. 73's |
Tech833
Moderator Username: Tech833
Post Number: 2335 Registered: 8-2002
| Posted on Thursday, October 22, 2015 - 12:21 pm: |
|
The Super Scanner did work well, as long as you got it way up in the air. A lot of CBers that stuck to the rules had mixed feelings about the mounting height of a Super Scanner. Those of us who were around back in the licensed days remember the rule about antennas and height above ground or mounting structure well. The rule is still technically in effect, but appears to no longer be enforced as vigorously as it used to be. The rule said (simplified) that an omnidirectional antenna could be either 60 feet above ground, or 20 feet above the mounting structure (like a building). A directional antenna (like a Yagi) could only be 20 feet above structure OR ground. So, if you followed the rules to the letter, and you ran your Super Scanner in omni mode, you could have it 60 feet above ground (and they worked very well at that elevation). However, if you ran your Super Scanner in directional mode, then you couldn't have it more than 20 feet above ground. It got VERY confusing. I remember some very heated on-air arguments about that. However, I am unaware of any FCC enforcement action against a Super Scanner owner for being too high above ground. The major advantage to the MR-77 beams was you could stick to the 20 feet above ground requirement without the elements dragging on the ground or your roof. What the FCC never clarified about the directional antenna rule was whether 20 feet meant to the highest point, or the boom. Most people, including manufacturers, went with the boom height above ground. Lots of those 10 foot "roof towers" were sold to people with beams. Your radio 'Mythbuster' since 1998
|