| Author |
Message |
    
Streaky
Intermediate Member
Username: Streaky
Post Number: 110
Registered: 3-2006
| | Posted on Monday, July 30, 2007 - 11:42 pm: | 
|
I have 2995DX and would liketo purchase the KLV1000P but would like to know if you actually have to set the dead key or do you just use the variable power to set the correct wattage?
Streaky
CEF #805
CVC #98
|
Thehobo
Intermediate Member
Username: Thehobo
Post Number: 122
Registered: 2-2004
| | Posted on Wednesday, August 01, 2007 - 8:16 am: |
|
streaky, thats the set up i use to have!! the way i use it was set the dk on the radio to 10 watts, turn on amp check dk on amp on the low switch, set it for about 200 using the radio power variable, then tune the rest from there?? on high i had the amp dk at 300, with the radios dk at 12 watts i believe?? of course each set up will be different.. from those settings i tuned the amp with an audio then rechecked all to those figures?? if you get the p model enjoy??
thehobo
269150 am
monitor ch |
Streaky
Intermediate Member
Username: Streaky
Post Number: 113
Registered: 3-2006
| | Posted on Thursday, August 02, 2007 - 9:50 pm: |
|
Roger that Hobo that is the route I will be taking will catch you on the air soon!!
Streaky
CEF #805
CVC #98
|
