Author |
Message |
2va626
New member Username: 2va626
Post Number: 1 Registered: 2-2005
| Posted on Thursday, March 17, 2005 - 9:03 pm: |
|
I have 2 2950dxs one a month old and 3 years old they were doing 20 watts on ssb and am but now will only will do 10 on ssb 5 am 1.1 swr |
Bruce
Senior Member Username: Bruce
Post Number: 2357 Registered: 9-2003
| Posted on Thursday, March 17, 2005 - 11:00 pm: |
|
Hummmmmm ?? how did you measure them and are both doing this? |
Bc910
Intermediate Member Username: Bc910
Post Number: 462 Registered: 7-2004
| Posted on Thursday, March 17, 2005 - 11:12 pm: |
|
BOTH!? Gotta be either the meter or the antenna One more reason you should always check power into a dummy load, not an antenna BC |
2va626
New member Username: 2va626
Post Number: 2 Registered: 2-2005
| Posted on Friday, March 18, 2005 - 12:03 am: |
|
one in a mobile one as a base they were check with a dummy load and different meters |
Bruce
Senior Member Username: Bruce
Post Number: 2361 Registered: 9-2003
| Posted on Friday, March 18, 2005 - 12:13 pm: |
|
hummmmm????? did you try another radio like a stock cb set which should show about 4 watts ????
|
Tech808
Moderator Username: Tech808
Post Number: 5275 Registered: 8-2002
| Posted on Friday, March 18, 2005 - 1:23 pm: |
|
2va626, It could be your Dummy Load is shorted or bad. What kind are you using a Dry or Wet/Oil Dummy Load? Lon Tech808 CEF808 N9OSN |
2va626
New member Username: 2va626
Post Number: 3 Registered: 2-2005
| Posted on Friday, March 18, 2005 - 9:01 pm: |
|
I HAVE USED DIFFERENT RADIOS THEY CHECK OK A friend has a new 2950dx 2 months old doing the same thing. used different meters and dummy loads I have emailed rangers tech thanks Gordon 2va626 CEF181 |