| Author |
Message |
    
70landcruiser
Junior Member
Username: 70landcruiser
Post Number: 16
Registered: 1-2005
| | Posted on Friday, February 18, 2005 - 6:39 pm: | 
|
I have a x-force 20012hd base amp, would this work as a driver for a x-force 60012hd, x-force charts show a x-80 as a recommended driver, but the 20012 on low looks like it would be close to the x-80 in output! would high be to much for the 60012? will this set-up allow me to run just the driver, with the option of the bigger amp when needed? yes I'm a rookie! I've been looking throught the post and its answered alot of my questions! thanks Doug |
Patzerozero
Intermediate Member
Username: Patzerozero
Post Number: 470
Registered: 7-2004
| | Posted on Saturday, February 19, 2005 - 4:34 pm: |
|
yes, you can run the driver amp without the big box on.
no, you can't drive the 60012 w/the 20012hd. at least not very many times. the x80 would be on LOW itself to drive the 60012, as it requires only about 20-25 watts dead key. you'd probably be getting just over 100 swing from the 80 at that level. the 20012 probably dead keys closer to 80 on low & swings 200.
setting up multiple amps requires an accurate wattmeter, knowledge of what amp will handle input-wise at given voltage, and patience-because the estimates from the amp builder regarding setup aren't exact, but you have to get 'em right or POOF! |
|
