| Author |
Message |
    
Alan B. Doss (Unregistered Guest)
Unregistered guest
| | Posted on Friday, February 04, 2005 - 6:42 pm: | 
|
Hello, I could really use some Help, I am a novice and I own a Mint Robyn T-240D CB with No original Mic, I do have a Turner 251 Desk Mic that I would love to wire to the Robyn but I don't know how, could someone Help explain how, I've seen a couple mic ads and they talk about pin 1 Red Etc. but I don't know which pin is which, Help here would surely be appreciated, Thanks Alan. |
Racer X (Unregistered Guest)
Unregistered guest
| | Posted on Friday, February 04, 2005 - 8:46 pm: |
|
Alan - The 4 pins in the jack on the radio are numbered 1-4 counter clockwise starting from the lug. The microhone plug itself should also have the pins marked.
I had to look up the radio in my Sams manuals to find it's wiring:
1-Audio
2-TX
3-GND
4-RX
The Turner 251 should be as follows:
WHITE-AUDIO
SHIELD-GND
RED-RX
BLACK-TX
So you want to wire the mic:
1-White
2-Black
3-Shield
4-Red
I'd suggest you buy this book to learn the basics including how to wire nearly any microphone to any radio:
http://www.copperelectronics.com/cgi-bin/checkitout/checkitout.cgi?catalogSTORE:CKIE:prodBKS-00020+
It's a great book to own, and I still refer back to it from time to time myself.
Good luck!
|
Alan_doss
New member
Username: Alan_doss
Post Number: 1
Registered: 2-2005
| | Posted on Saturday, February 05, 2005 - 12:09 am: |
|
Thank You very much Racer X, I really do appreciate all the time you took to look this up for me, and explain in detail the assembly, Alan. |
|
