| Author |
Message |
    
Jimmy396
Member
Username: Jimmy396
Post Number: 64
Registered: 1-2002
| | Posted on Saturday, January 29, 2005 - 11:08 am: | 
|
Anyone have this set up and how does it sound.And what is the wiring setup MIC to Radio THANKS Jimmy |
Jimmy396
Member
Username: Jimmy396
Post Number: 67
Registered: 1-2002
| | Posted on Sunday, January 30, 2005 - 4:55 am: |
|
Help! ) Jimmy |
Tech808
Moderator
Username: Tech808
Post Number: 4685
Registered: 8-2002
| | Posted on Sunday, January 30, 2005 - 7:08 am: |
|
Jimmy396,
Sorry but I can't help on this one, But if you would post this question in the:
Ask The Tech
» Ham Gear
Area you might get more help.
Hope this helps,
Lon
Tech808
CEF808
N9OSN |
Bob_p
Advanced Member
Username: Bob_p
Post Number: 671
Registered: 7-2004
| | Posted on Sunday, January 30, 2005 - 10:00 am: |
|
Can't help you with the wiring for the Icom, but I put a standard +3 on my Kenwood TS 480HX, and I've been told it sounds better than the Heil HM-5 they sent me as a promotional item for the holidays.
Bet if you search around the on internet, you can find the wiring for it,
Good luck
Bob |
Yankee
Intermediate Member
Username: Yankee
Post Number: 380
Registered: 7-2003
| | Posted on Sunday, January 30, 2005 - 10:57 am: |
|
Which microphone plug does the 706 have? If it's the standard 8 pin plug I can help with the pin out. And am I correct that the plus 3b is a 6 wire cord? |
Jimmy396
Member
Username: Jimmy396
Post Number: 68
Registered: 1-2002
| | Posted on Sunday, January 30, 2005 - 11:34 am: |
|
Hi Yes its a 6 wire +3B and its an 8 Pin Modular icom i need Turner color to Pin # on 706 .Thanks Jimmy |
Yankee
Intermediate Member
Username: Yankee
Post Number: 381
Registered: 7-2003
| | Posted on Sunday, January 30, 2005 - 1:20 pm: |
|
sorry Jimmy, if it was a standard 8 pin I could have helped. But not with the modular plug. |
Patzerozero
Intermediate Member
Username: Patzerozero
Post Number: 385
Registered: 7-2004
| | Posted on Monday, January 31, 2005 - 12:40 am: |
|
doesn't heil make an adapter cord to put an 8 pin icom plugged mic onto an icom modular chassis? can't find it, could be wrong, but it sounds familiar... |
Racer X (Unregistered Guest)
Unregistered guest
| | Posted on Monday, January 31, 2005 - 6:52 am: |
|
I downloaded the Icom 706MKIIG manual and took a look at the microphone wiring. The modular jack pins go 1-8 from left to right. The pins that are used for simple microphone funtion are:
4-PTT
5-Mic Ground
6-Mic audio
Looking through an old Turner wiring booklet for the 6 wire functions it shows:
PTT-Blue
Audio-White
Mic Ground-Shield
So to wire the Turner +3 to the Icom 706MKIIG:
Blue-4
Shield-5
White-6
Let us know it if works. |
