| Author |
Message |
    
Xlaxx
Intermediate Member
Username: Xlaxx
Post Number: 266
Registered: 4-2002
| | Posted on Wednesday, December 29, 2004 - 1:16 pm: | 
|
I just acquired one of these meters for $26, reads 20W, 200W, 2000W; headphone jack for AM monitoring, reads SWRs, has a volume/swr dial and also a toggle switch for reading peak Watts / average Watts / peak Watts hold. It also has a BNC connector on the front face plate and on the back panel. I tried to do a google search for a manual but can only find one for the Mark II A.
This one is in good condition, pretty clean (wiped down some old cigarette tar), needle is a little bouncy, but was wondering if anybody could help me find out what the peak hold position is for and the BNC connectors. Like I said a manual would be great but could use a user's recommendation on this meter.
Thanks
XLAXX |
Xlaxx
Intermediate Member
Username: Xlaxx
Post Number: 267
Registered: 4-2002
| | Posted on Friday, December 31, 2004 - 10:00 pm: |
|
Any takers on this one? Could use an original or copy of the manual.
Thanks
XLAXX |
Xlaxx
Intermediate Member
Username: Xlaxx
Post Number: 268
Registered: 4-2002
| | Posted on Sunday, January 02, 2005 - 1:27 pm: |
|
Bruce-
Thanks for your email on this one,...
Still no luck though, the saga continues for the manual.
XLAXX |
Bruce
Senior Member
Username: Bruce
Post Number: 1969
Registered: 9-2003
| | Posted on Sunday, January 02, 2005 - 5:42 pm: |
|
this may help
http://www.w7fg.com/manuals.php?find=T&page=5 |
|
