Author |
Message |
Davec
Junior Member Username: Davec
Post Number: 21 Registered: 6-2003
| Posted on Monday, November 15, 2004 - 5:44 pm: |
|
What's the difference between the KLV1000 and the 1000P besides the input wattage? Which one would preform better with a Galaxy 2547DX? |
3406pack
New member Username: 3406pack
Post Number: 6 Registered: 11-2004
| Posted on Tuesday, November 16, 2004 - 2:08 am: |
|
I believe the 1000P will take a much higher dead key than the 1000,I am pretty sure it says that in the descibtions,read the specs on each one.-Harvey |
Tech808
Moderator Username: Tech808
Post Number: 4094 Registered: 8-2002
| Posted on Tuesday, November 16, 2004 - 8:23 am: |
|
Davec, KLV-1000 Base LOW DRIVE AMPLIFIER* FEATURES: Frequency: 26-30 MHz Tubes: (5) EL 519 Input Power: 4 Watts (I recommended using 2 - 1/2 to 3 watts for good long life.) Output Power: 600/1200 Watts Mode AM/FM/SSB/CW 26 db Gain On/Off Switch AM/SSB Switch On/Off Switch Ready/Standby Switch Load Knob Drive Knob Tune Knob Power Meter SWR Meter On Air Indicator Light Fuse 8A Size: 385x365x195 MM ________________________________________________ KLV-1000P Base HIGH DRIVE AMPLIFIER* FEATURES: Frequency: 26-30 MHz Tubes: (4) EL 519 Input Power: 60-100 Watts Output Power: 600/1200 Watts Mode AM/FM/SSB/CW 26 db Gain On/Off Switch AM/SSB Switch On/Off Switch Ready/Standby Switch Load Knob Drive Knob Tune Knob Power Meter SWR Meter On Air Indicator Light Fuse 8A Size: 385x365x195 MM ********************************************** NOTE! If your radio Will Not put out the 60 to 100 watts needed (or Around 75 to 80 for good performance) then you need to use the KLV-1000 LOW DRIVE Amplifier. Hope this helps. Lon Tech808 CEF808 N9OSN
|
oklahobo (Unregistered Guest)
Unregistered guest
| Posted on Tuesday, November 16, 2004 - 11:46 am: |
|
808, the 1000p model is only a 4 tube amp!! in your description of such, it states 5 tubes?? i no, a typo?? lol. just trying to keep info straight. thanks for your input.. thehobo 274150 am monitor ch. |
Tech808
Moderator Username: Tech808
Post Number: 4096 Registered: 8-2002
| Posted on Tuesday, November 16, 2004 - 11:57 am: |
|
oklahobo, You are correct and I have changed it. That is what happens when I copy and paste. Lon Tech808 CEF808 N9OSN |
Allagator
Advanced Member Username: Allagator
Post Number: 506 Registered: 9-2002
| Posted on Tuesday, November 16, 2004 - 9:56 pm: |
|
Yep the KLV1000P works great with the RCI2995DX trust me !!!! i have both 2995DX and the KLV1000P Allagator !! CEF115 |
Applejack
Intermediate Member Username: Applejack
Post Number: 234 Registered: 8-2003
| Posted on Wednesday, November 24, 2004 - 10:59 pm: |
|
and he's still a MUDDUCK!!!!!
|