| Author |
Message |
    
Hoskinmage
Junior Member
Username: Hoskinmage
Post Number: 21
Registered: 3-2002
| | Posted on Monday, May 24, 2004 - 9:10 am: | 
|
i just got a problem,i have a lot of standing wave in my moble. i was on my way to work when i noticed on my meter that i had very high standing wave,so i tryed to go over it from top to bottom starting with my jumpers(2) than i went to work on the ant. ,a 5 ft. frances on a trunk mt. all this was fine so i worked with it and i got it down to .5 on the radio but it is still a 3 on my kicker(black cat 300) and some times it goes up to 3lb.s and it'll go down(car is not moving)since my standing wave was at 1 lb. radio,1.8 with the box.is there anything that i can do to find the problem. i have also tryed another ant,k-40 and it still does the same thing.my radio is a vr9000 and a black ct300. i am stumped and i need some help. thanks for all the help.
hoskinmage(cry baby) |
Cuddlebear
Intermediate Member
Username: Cuddlebear
Post Number: 164
Registered: 3-2002
| | Posted on Monday, May 24, 2004 - 4:56 pm: |
|
I had that problem once myself in my car. I did everything I could to bring it down. Never could, Another Tech told me it was my amp that was responsible for the trouble. Was internal. I finally took the amp out of the loop and the problem was solved. But that was just me, I can't say what your problem is exactly, Could be a bad cable end etc.
 |
Hoskinmage
Junior Member
Username: Hoskinmage
Post Number: 25
Registered: 3-2002
| | Posted on Tuesday, May 25, 2004 - 9:18 am: |
|
no it has gone up to the red on both ant,differnt jumpers. what would be causing this maybe not a good enough ground on the bat.? i have a line from the batt. to the radio and i also hooked my box to this line. i went over the ant. from top to bottom and it checks out fine. please anybody help. i dont want to even turn it on cause i dont want anything to happen to it. do i have an ant.that has went bad or what? if someone could tell me what is wrong?
helllllp
crybaby |
|
