| Author |
Message |
    
Xlaxx
Intermediate Member
Username: Xlaxx
Post Number: 248
Registered: 4-2002
| | Posted on Tuesday, March 09, 2004 - 9:57 pm: | 
|
Could someone please provide the tune and peak for this rig?
Also, does the Expander 100 kit work well for extra channels on this radio?
Thank you!
XLAXX |
Xlaxx
Intermediate Member
Username: Xlaxx
Post Number: 249
Registered: 4-2002
| | Posted on Tuesday, March 09, 2004 - 10:22 pm: |
|
FYI,...BTW,...
Made in the Phillipines Model.
Do not want to cut limiter if at all possible.
Would like to lower dk to run a small coffee warmer behind it.
Thank you
XLAXX |
Tech808
Moderator
Username: Tech808
Post Number: 1748
Registered: 8-2002
| | Posted on Tuesday, March 09, 2004 - 10:23 pm: |
|
XLAXX,
MODULATION: ADJUST VR4 or CUT D11
AM POWER: ADJUST L14, L13, L12
As for the Expander kit I cannot say as I have never used one.
Hope this help's.
Lon
Tech808 |
Crafter
Advanced Member
Username: Crafter
Post Number: 967
Registered: 12-2002
| | Posted on Tuesday, March 09, 2004 - 11:49 pm: |
|
Xlaxx I'll have the answer tomorrow on the mail question is that a upd2824 PLL? It could be one of two. Phillipines means good one though!
P.S. no need to clip the diode on that one opening vr4 is enough. |
Hoskinmage
Junior Member
Username: Hoskinmage
Post Number: 16
Registered: 3-2002
| | Posted on Wednesday, March 10, 2004 - 10:35 am: |
|
xlaxx,i have a pc76xl i bought from copper about9 or 10 years ago had it peaked and tuned with a super mod kit(1st one when they first come out)and it is still works as good as new. cover was only took off 1 time.all so i got a eagel 2000 at the same time(still going strong) i highly recomend this radiop,its been good for me |
Xlaxx
Intermediate Member
Username: Xlaxx
Post Number: 250
Registered: 4-2002
| | Posted on Wednesday, March 10, 2004 - 10:06 pm: |
|
Thank you for the replies.
Was trying to set up this radio and was told that cutting the limiter would make it a little better but didn't want to do it.
Seems that replacing the 2SC1969 makes a difference on this radio.
Was told 16-18W max.
Anyway, thank you for the tips!
XLAXX |
Cm3885
Intermediate Member
Username: Cm3885
Post Number: 251
Registered: 12-2003
| | Posted on Thursday, March 11, 2004 - 12:02 am: |
|
I had one a few years ago and had my CB shop guy do the big final and driver mod and it talked up a storm afterwords.. Non need to cut the limiter it talks great with it in place as it is!! Although i did remove it to see what it would do with the limiter gone.. no difference on the meter so i soldered it back in place! |
Boxcar
Intermediate Member
Username: Boxcar
Post Number: 248
Registered: 4-2002
| | Posted on Thursday, March 11, 2004 - 5:50 am: |
|
Hey CM3885, that 76 is the same as the 29 isn't it? |
Tech808
Moderator
Username: Tech808
Post Number: 1764
Registered: 8-2002
| | Posted on Thursday, March 11, 2004 - 7:59 am: |
|
Boxcar,
Yes the Uniden PC76 is the same as the Cobra 29 GTL & LTD model's.
Lon
Tech808 |
Xlaxx
Intermediate Member
Username: Xlaxx
Post Number: 251
Registered: 4-2002
| | Posted on Friday, March 12, 2004 - 9:23 am: |
|
Lon-
What is the wattage you have seen with the new driver and final changes?
Thanks
XLAXX |
Tech808
Moderator
Username: Tech808
Post Number: 1776
Registered: 8-2002
| | Posted on Friday, March 12, 2004 - 10:10 am: |
|
Xlaxx,
Sorry, can't help you with that one.
I have found it is much more reasonable in Price and more power if you add a KL40 / KL60 or KL300 than replacing the Driver and Upgrading the Final.
Depending on the amount of power you are looking for.
On the PC 76/78 I alway's Suggest and use a KL-300 on them.
Lon
Tech808 |
Cm3885
Intermediate Member
Username: Cm3885
Post Number: 259
Registered: 12-2003
| | Posted on Friday, March 12, 2004 - 12:05 pm: |
|
Well i can help here.. LOL
I had mine changed from the stock setup to the 1969 and it made a huge diference.. About 20 to 25 watts more swing from the stock wattage. |
Xlaxx
Intermediate Member
Username: Xlaxx
Post Number: 252
Registered: 4-2002
| | Posted on Friday, March 12, 2004 - 12:42 pm: |
|
Cm3885-
That's pretty good. Thank you.
Lon-
I just don't want to buy another amp,... I have enough stuff, at least the XYL thinks so.
Thank you for the info.
XLAXX |
