Copper Talk » Open Forum » Archived Messages » 2002 » Archived Messages 05/01/2002 to 06/30/2002 » President Lincoln Conversion MRF 497 « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

xlaxx
Posted on Tuesday, April 30, 2002 - 12:11 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Has anyone switched out the MRF 477 stock transitor to the MRF 497 transitor on the lincoln? I have a new lincoln and I have heard that the upgrade will increase power to 50 watts. Apparently these transitors are becoming rare to find and run about $35. Thanks for the opinions. xlaxx
Top of pagePrevious messageNext messageBottom of page Link to this message

Tech181
Posted on Wednesday, May 01, 2002 - 12:19 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

xlaxx,

There's a better mod using the MRF455. There was a post on this forum that gave the web address to buy the kit. Search for it on the forum. Sorry I can't give you the exact post.

Steve
Tech181
Tech181@copperelectronics.com
Top of pagePrevious messageNext messageBottom of page Link to this message

Highlander
Posted on Wednesday, May 01, 2002 - 7:04 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

If it is a NEW Lincoln, you probably have an mrf455 final. Mine does, but the schematic still says 477. If you have the 455, don't mess with it!

David
n9rzf
Top of pagePrevious messageNext messageBottom of page Link to this message

xlaxx
Posted on Wednesday, May 01, 2002 - 12:20 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Tech181 & Highlander,
Thanks for the posts! I have been timid about opening up this radio as there is a warranty sticker on the side of it....AND... I have heard so many good things about this rig that I'm scared to even touch the guts of it less something go boom! Anyway, thanks-xlaxx
Top of pagePrevious messageNext messageBottom of page Link to this message

xlaxx
Posted on Friday, May 03, 2002 - 12:47 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

highlander-
my lincoln has the 455. i adjusted the rig to do 2.5W deadkey, swings about 40. i want to run a little power but am hesitant about putting in a swing kit on a dual final radio like this one. any recommendations? xlaxx
Top of pagePrevious messageNext messageBottom of page Link to this message

Highlander
Posted on Friday, May 03, 2002 - 2:56 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I dont run my klv mod351p that hard--more like 1.5 watt dk swing 10-12 seems to like that alot. All I did to mine was open up the AMC a little for 95-100 percent mod. The variable power doesn't seem to do much on sideband, so I just hit the mic gain button to low for ssb with the amp. Worked Hawaii from central ill last weekend and he said I was the best sounding rig on the air at that moment...

David
n9rzf
Top of pagePrevious messageNext messageBottom of page Link to this message

xlaxx
Posted on Thursday, May 09, 2002 - 1:32 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

highlander-
i adjusted a couple things. the lincoln is a pretty good radio. it dk's 2.5 and swings about 40-45. it's not enough to drive a couple bigger amps i'm using w/o a swing kit. i guess i'm a little surprised because i thought the MRF 455 driver would produce more swing. any other recommendations?
thanks xlaxx
Top of pagePrevious messageNext messageBottom of page Link to this message

Highlander
Posted on Friday, May 10, 2002 - 11:20 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Well, the 455 is the final, not a driver. The Lincolns are single final radios. I think the 455 is rated at 60 watts, so 40-45 is getting alot out of it, actually.

David
n9rzf