| Author |
Message |
    
Dr.BoGator (Unregistered Guest)
Unregistered guest
| | Posted on Wednesday, June 23, 2004 - 1:12 pm: | 
|
I am looking for a Schematic on a variable voltage regulator for an alternator,I have posted on two or three message boards but so far no one has been able to help other than to suggest that I buy an allready built regulator!...I don't want to buy a already built regulator !....I just need the schematic and I will build it myself...I have a heavy duty Leece-Neville alternator and I want to add it to my existing system so I need to be able to run two alternators and be able to control the voltage on the Leece-Neville alternator from say 10 volts up to maybe 18-20 volts DC.......can anyone tell me where I can get a copy of the schematic of a Variable voltage regulator circuit?
I am also looking for a schematic/circuit diagram for a single final output transistor using a 2sc2290 or maybe a SD1446...I saw one that someone had tried to hook up on the inside back of the radio case but it was a crude job and it didn't look all that good........
And the last thing that I need help on is a web link to or construction plans on building a homemade 5 to 10 KW, 50 Ohm Dummy load...either oil filled or water cooled.I have been searching Google but haven't had a lot of luck, anyone got any ideas ?
Just post your answers here and I will check back often to see if anyone can help Thanks,Dr.BoGator
|
That ELCO Guy (Unregistered Guest)
Unregistered guest
| | Posted on Wednesday, June 23, 2004 - 6:16 pm: |
|
@ gator guy....
Try this on for size....
http://www.arrl.org/members-only/tis/info/pdf/0105043.pdf
If you have any problems bringing up the web page let me know and I will attempt to copy and paste it here for you. |
Dr.BoGator (Unregistered Guest)
Unregistered guest
| | Posted on Friday, June 25, 2004 - 3:16 pm: |
|
Thanks,that was a fast reply but I wasn't able to bring it up(members only).... so if you could copy and paste it here it would help a lot....thanks for the fast reply.......maybe there are others out there who could help me also......I'll check back here every few days......thanks again |
Tech237
Moderator
Username: Tech237
Post Number: 63
Registered: 4-2004
| | Posted on Saturday, June 26, 2004 - 10:18 am: |
|
How much current flow on that regulator?? |
