| Author |
Message |
    
Unit199
| | Posted on Wednesday, November 26, 2003 - 3:22 pm: | 
|
I want to run a power mic on it. What do I have to do and what kind of mic do you suggest? Any and all help will be appreciated. Thanks, Harve-Unit199 |
Unit199
| | Posted on Wednesday, December 03, 2003 - 6:45 am: |
|
Well, I guess I am the only person that knows this is here. If I am the only one going to post here, then we can just post on ask the tech. |
Tech808
| | Posted on Wednesday, December 03, 2003 - 9:37 am: |
|
Unit199,
You can wire an Astatic Silver / Night, Eagle or D104 to it.
Astatic Wiring for Most 8 Pin Icom's is:
Pin #1 ~ White / Audio
Pin #5 ~ Red / Transmit
Pin #6 ~ Blue / Common
Pin #7 ~ Shield / Ground
Yellow & Black N/C
Hope this Help's
Lon
Tech808 |
Hootyal
| | Posted on Wednesday, December 03, 2003 - 5:08 pm: |
|
Make sure there's no voltage on the audio wire like on the 706 mkgII. If there is, you need to add a 33k ohm resistor or damage may occur. I use a d104 on mine & it works great with the resistor added......Good luck, HootyAl |
Unit199
| | Posted on Friday, December 05, 2003 - 2:33 am: |
|
Thanks Lon and Hootyal for the help. It is greatly appreciated. I was beginning to wonder if I was the only one that realized this was here. Thanks, Harve-Unit199 |
|
