| Author |
Message |
    
Silverbullet516
Junior Member
Username: Silverbullet516
Post Number: 31
Registered: 7-2012
| | Posted on Tuesday, January 31, 2017 - 9:22 pm: | 
|
Is there anyone who makes this pre-made? Is it possible? I drive a Pete 379 and already have the antennas and mounts. I'm wanting to run a dual antenna setup with the Sweet 16 . Any ideas or suggestions will be appreciated thanks in advance. |
Milkman21218
Advanced Member
Username: Milkman21218
Post Number: 648
Registered: 1-2004
| | Posted on Thursday, February 02, 2017 - 9:50 pm: |
|
RG-213 coax is 50 Ohm. For Dual Antennas you need 75 Ohm coax. If you really need that size coax get to equal lengths of 75 Ohm coax into a Tee connector. Then use a single 50 ohm coax to radio.
Izzy
CEF#502
|
Silverbullet516
Junior Member
Username: Silverbullet516
Post Number: 32
Registered: 7-2012
| | Posted on Friday, February 03, 2017 - 6:41 pm: |
|
I was aware of the 75 ohm I'm just looking for a place that I can get it Pre-made because I don't trust the T style Connector with that amount of power. but I have seen the antenna switch boxes that are rated at 4000 Watts and can connect two antennas and run them both at the same time or separate of each other. any thoughts on this method? |
Milkman21218
Advanced Member
Username: Milkman21218
Post Number: 649
Registered: 1-2004
| | Posted on Tuesday, February 07, 2017 - 2:06 am: |
|
That may work. If it were me I would purchase a good Ham model switch because of the power.
Izzy
CEF#502
|
Silverbullet516
Junior Member
Username: Silverbullet516
Post Number: 33
Registered: 7-2012
| | Posted on Wednesday, February 15, 2017 - 11:20 am: |
|
Thanks for the input |
