| Author |
Message |
    
Waterboy57
New member
Username: Waterboy57
Post Number: 2
Registered: 6-2014
| | Posted on Saturday, June 07, 2014 - 7:51 am: | 
|
I put back into service my AlphaForce Magnum. Anyone remember the keys to hold down to get it to do the CB Freqs? Thanks...... |
Possum_lodge
Junior Member
Username: Possum_lodge
Post Number: 28
Registered: 5-2014
| | Posted on Saturday, June 07, 2014 - 7:10 pm: |
|
Here is a mod's page for you to look at..
Not quite sure what you mean by holding down two keys to get it to go to the CB mode..
http://www.radiomods.co.nz/magnumdeltaforcemod.html |
Possum_lodge
Junior Member
Username: Possum_lodge
Post Number: 29
Registered: 5-2014
| | Posted on Saturday, June 07, 2014 - 7:12 pm: |
|
To toggle to 10 & 11-Meter operation, momentarily press the CLAR/FUNC control, then hold the CALL button for 3 seconds and release, this will be required each time the radio is powered on until an 11-Meter frequency is programmed into memory. |
Waterboy57
New member
Username: Waterboy57
Post Number: 3
Registered: 6-2014
| | Posted on Sunday, June 08, 2014 - 8:17 am: |
|
Hey tnx for the info, worked well, now all I need to find is out how to change it from a channel # to a frequency readout out. Did not see that on the radiomods page..... |
Waterboy57
New member
Username: Waterboy57
Post Number: 4
Registered: 6-2014
| | Posted on Sunday, June 08, 2014 - 8:56 am: |
|
got it, push function and call again for 3 seconds, and when released, it will display in frequency readout!! |
Possum_lodge
Junior Member
Username: Possum_lodge
Post Number: 30
Registered: 5-2014
| | Posted on Monday, June 09, 2014 - 8:43 am: |
|
You are welcome... |
