Author |
Message |
Ai4ep
New member Username: Ai4ep
Post Number: 4 Registered: 11-2007
| Posted on Sunday, January 06, 2008 - 8:56 pm: |
|
I need the VR controls for the above mentioned radio....and the RV controls, too...!!! Thanks in advance. AI4EP (Robert) |
Tech858
Moderator Username: Tech858
Post Number: 94 Registered: 10-2007
| Posted on Tuesday, January 08, 2008 - 1:23 pm: |
|
Robert Which version of the Hy-Gain V is it as there is more than 1 version , is it the 2705 or the 8795 , also is it 40ch or 50ch per band ??? Tech858/Jim MM0TXO CEF#858 HAM#230 CVC#116 Wavin' a hand at ya' fae Scotland
|
Ai4ep
New member Username: Ai4ep
Post Number: 6 Registered: 11-2007
| Posted on Wednesday, January 09, 2008 - 8:30 pm: |
|
it is the 40 channel am/ssb version, commonly used in the USA around 1970 - 1980. I know, there is a 23 channel version , too ( I have it, and the G E 3 - 5825 , which is a 40 channel am/ssb model ). It MAY be the " model 1705 " you are referring to. Any way, what is need is 2 seperate models --- 23 channel hy-gain V & 40 channel CE 3-5825 The vr & rv controls and what they do . |
Tech858
Moderator Username: Tech858
Post Number: 97 Registered: 10-2007
| Posted on Thursday, January 10, 2008 - 7:57 am: |
|
Robert I have mailed some info to you , I hope it is of some help to you , as for the GE 3-5825 what is the board number on it as it will most likely be a cybernet board , I cannot find much on that one so far . Tech858/Jim MM0TXO CEF#858 HAM#230 CVC#116 Wavin' a hand at ya' fae Scotland
|
Ai4ep
New member Username: Ai4ep
Post Number: 7 Registered: 11-2007
| Posted on Thursday, January 10, 2008 - 10:23 pm: |
|
tech 858 --- a tad bit of overkill, but all is ok. I figured out the correct vr & rv controls by " researching " through the information YOU provided...in simple terms a bit of " trial & error & LEARNING ". THANK YOU for the extra effort. What I was expecting was the version of " going through an old SAMS PHOTOFACT BOOK " and copying down what each vr control does , along with the RV controls.....not what I recieved. You did a whole bunch better. Once again, thanks for your help. I also learned how much ( yet apart ) the hy- gain is from the G E, along with other brands / models that are similar. You can either put this post out on display, or copy it and put on the wall of a happy COPPER member. About the only CB rig stuff I mess with these days is the old 23 channel am / ssb stuff...better built radios than just AM models . |
Tech858
Moderator Username: Tech858
Post Number: 98 Registered: 10-2007
| Posted on Friday, January 11, 2008 - 9:35 am: |
|
Thanks very much for the kind words Robert I am glad it was of some use to you , this is what the Copper Forum is all about , we are all in here to help each other as much as we can and to make everyone feel welcome . Tech858/Jim MM0TXO CEF#858 HAM#230 CVC#116 Wavin' a hand at ya' fae Scotland
|